Highly filled thermoplastic elastomers from ground tire rubber, maleated polyethylene and high density polyethyleneKAKROODI, A. R; RODRIGUE, D.Plastics, rubber and composites. 2013, Vol 42, Num 3, pp 115-122, issn 1465-8011, 8 p.Article

Impact of the use of renewable materials on ecoefficiency of manufacturing processesCOLWILL, J. A; RAHIMIFARD, S.Plastics, rubber and composites. 2013, Vol 42, Num 3, pp 129-133, issn 1465-8011, 5 p.Article

Mechanical and electrical properties of alumina―natural rubber compositesTANGBORIBOON, N; CHAISAKRENON, S; BANCHONG, A et al.Plastics, rubber and composites. 2013, Vol 42, Num 1, pp 26-33, issn 1465-8011, 8 p.Article

Plastics recycling: insights into life cycle impact assessment methodsRAJENDRAN, S; HODZIC, A; SCELSI, L et al.Plastics, rubber and composites. 2013, Vol 42, Num 1, pp 1-10, issn 1465-8011, 10 p.Article

Analytical modelling of hysteresis heating in rolling contact of rubber covered rollersAUSTRELL, P.-E.Plastics, rubber and composites. 2013, Vol 42, Num 7, pp 276-281, issn 1465-8011, 6 p.Article

Effect of multiple step creep/creep recovery loading on non-linear viscoelastic response of carbon fibre reinforced polymersZAOUTSOS, S.Plastics, rubber and composites. 2013, Vol 42, Num 8, pp 315-322, issn 1465-8011, 8 p.Article

Effect of protective glove use conditions on their resistance to needle punctureNGUYEN, C. T; DOLEZ, P. I; VU-KHANH, T et al.Plastics, rubber and composites. 2013, Vol 42, Num 5, pp 187-193, issn 1465-8011, 7 p.Conference Paper

Investigation of sandwich structures with innovative cellular metallic cores under low velocity impact loadingLABEAS, G; PTOCHOS, E.Plastics, rubber and composites. 2013, Vol 42, Num 5, pp 194-202, issn 1465-8011, 9 p.Conference Paper

Effects of microvoiding on tensile deformation and fracture of polyoxymethyleneVOGIATZOGLOU, S; MOHANRAJ, J; BARTON, D. C et al.Plastics, rubber and composites. 2012, Vol 41, Num 3, pp 137-147, issn 1465-8011, 11 p.Article

Efficient combined method of selective dissolution and evaporation for recycling waste polyvinylbutyral filmsWANG, H; XIE, C; YU, W. T et al.Plastics, rubber and composites. 2012, Vol 41, Num 1, pp 8-12, issn 1465-8011, 5 p.Article

Influence of carbon black and plasticisers on dynamic properties of isotropic magnetosensitive natural rubberALBERDI-MUNIAIN, A; GIL-NEGRETE, N; KARI, L et al.Plastics, rubber and composites. 2012, Vol 41, Num 7, pp 310-317, issn 1465-8011, 8 p.Article

Oscillatory shear rheology of polystyrene melts filled with carbon black and fullereneBERA, O; TRUNEC, M.Plastics, rubber and composites. 2012, Vol 41, Num 9, pp 384-389, issn 1465-8011, 6 p.Article

A review on composite materials based on recycled thermoplastics and glass fibresSCELSI, L; HODZIC, A; SOUTIS, C et al.Plastics, rubber and composites. 2011, Vol 40, Num 1, pp 1-10, issn 1465-8011, 10 p.Article

Chemorheological study of phosphorylated flame retardant epoxiesYUNG, K. C; WANG, J; YUE, T. M et al.Plastics, rubber and composites. 2011, Vol 40, Num 1, pp 25-31, issn 1465-8011, 7 p.Article

Degradation of fatigue resistance of filament wound glass fibre reinforced/vinyl ester pipes exposed to aqueous environmentsKHAN, Z.Plastics, rubber and composites. 2011, Vol 40, Num 8, pp 397-401, issn 1465-8011, 5 p.Article

Development of EPDM nanocomposites in presence of compatibiliserRAJASEKAR, R; NAYAK, G. C; DAS, C. K et al.Plastics, rubber and composites. 2011, Vol 40, Num 3, pp 146-150, issn 1465-8011, 5 p.Article

Influence of physical aging on impact embrittlement of uPVC pipesVISSER, H. A; BOR, T. C; WOLTERS, M et al.Plastics, rubber and composites. 2011, Vol 40, Num 5, pp 201-212, issn 1465-8011, 12 p.Article

Characteristic of rapid heating cycle moulding and warpage analysis of productsLI, X.-P; ZHAO, G.-Q; GUAN, Y.-J et al.Plastics, rubber and composites. 2011, Vol 40, Num 9, pp 425-432, issn 1465-8011, 8 p.Article

Microscopic mechanism of multiaxial fatigue of vulcanised natural rubberWANG, Y. P; CHEN, X; YU, W. W et al.Plastics, rubber and composites. 2011, Vol 40, Num 10, pp 491-496, issn 1465-8011, 6 p.Article

Modelling of elastomeric materials and productsBUSFIELD, J. J. C.Plastics, rubber and composites. 2011, Vol 40, Num 4, issn 1465-8011, 51 p.Conference Proceedings

Properties of compression moulded new fully biobased thermoset composites with aligned flax fibre textilesPOHL, Th; BIERER, M; NATTER, E et al.Plastics, rubber and composites. 2011, Vol 40, Num 6-7, pp 294-299, issn 1465-8011, 6 p.Article

Analysing fluctuation of material properties of non-circular profile filament wound composite pipes along perimeter of cross-sectionCZEL, G; CZIGANY, T.Plastics, rubber and composites. 2011, Vol 40, Num 6-7, pp 369-373, issn 1465-8011, 5 p.Article

Processing and properties of glass/ polypropylene in long fibre compounding extrusionPRIEBE, M; SCHLEDJEWSKI, R.Plastics, rubber and composites. 2011, Vol 40, Num 6-7, pp 374-379, issn 1465-8011, 6 p.Article

Preparation and characterisation of UV irradiation cross-linked LDPE/EVA blendsSHAMEKHI, M. A; JAFARI, S. H; KHONAKDAR, H. A et al.Plastics, rubber and composites. 2010, Vol 39, Num 10, pp 431-436, issn 1465-8011, 6 p.Article

Strength of CFRP open hole laminates made from NCF, TFP and braided preforms under cyclic tensile loadingUHLIG, K; SPICKENHEUER, A; GLIESCHE, K et al.Plastics, rubber and composites. 2010, Vol 39, Num 6, pp 247-255, issn 1465-8011, 9 p.Article